Table of Contents

• Overview
• Setting Search Conditions
• Displayed Data
• Usage Examples
• Data Utilization Methods

Overview

The DataViewer tab allows you to view data collected from environmental sensors in real-time. You can use multiple filtering options to display only the information you need.

Setting Search Conditions

You can filter the displayed data using the following filters at the top of the screen:

• Area: Display data only from specific areas (e.g., “All”, “Office A”)
• Layer: Display data only from specific layers (e.g., “All”, “Layer 1”)
• Logical Device: Display data only from specific devices (e.g., “All”, “L-lumi.weather-sens”)
• Data Date: Specify the date when data was collected (e.g., 2025/4/14)
• End Time: Specify the end time for data collection (e.g., 23:59:59)

Displayed Data

In DataViewer, you can view the following information:

Usage Examples

For example, you can check data such as:

• Office A temperature: 24.2℃
• Office A humidity: 62.58%
• Office A pressure: 994.8hPa

Data Utilization Methods

The collected data can be utilized in the following ways:

• Checking indoor environment comfort
• Efficient operation of air conditioning equipment
• Analysis of long-term environmental changes
• Early detection of equipment malfunctions through anomaly detection

DataViewer is updated regularly, allowing you to always check the latest environmental data.