Description
The Patlite Action Component is to control a PATLITE network device including audio. The watchtower must support HTTP commands. For more information, please visit the Patlite website.
PATLITEs are useful to control the display according to the information from the sensors.
| Output Payload | Description |
|---|---|
cv.Payload | Outputs the output payload of the previous component as is. (Pass-through) |
Component Properties
| Name | Required | Description |
|---|---|---|
| IP address | True | The IP address of the watchtower |
| Red | True | Set to either On/Off/Blink1/Blink2/No Change. [The values to set for cp.Red are "off", "on", "blink-1", "blink-2", "no-change"]. |
| Amber | True | Set to either On/Off/Blink1/Blink2/No Change [The values to set for cp. Amber are "off", "on", "blink-1", "blink-2", "no-change"]. |
| Green | True | Set to either On/Off/Blink1/Blink2/No Change [The values to set for cp. Green are "off", "on", "blink-1", "blink-2", "no-change"]. |
| Blue | True | Set to either On/Off/Blink1/Blink2/No Change [The values to set for cp.Blue are "off", "on", "blink-1", "blink-2", "no-change"]. |
| White | True | Set to either On/Off/Blink1/Blink2/No Change [The values to set for cp.White are "off", "on", "blink-1", "blink-2", "no-change"]. |
| Play Sound | True | Play Sound |
| Sound Channel | True | Specify the channel to be played back using numbers. For details, see the manual for the device. |
| Repeat | True | Specifies the number of additional repetitions. If you don't want to repeat it, leave it blank. |
| Timeout | False | Timeout (ms) |