Gravio HubKit Manual

Table of Contents

1. Overview

The DataViewer tab allows you to view data collected from environmental sensors in real-time. You can use multiple filtering options to display only the information you need.

2. Setting Search Conditions

You can filter the displayed data using the following filters at the top of the screen: - Area: Display data only from specific areas (e.g., "All", "Office A") - Layer: Display data only from specific layers (e.g., "All", "Layer 1") - Logical Device: Display data only from specific devices (e.g., "All", "L-lumi.weather-sens") - Data Date: Specify the date when data was collected (e.g., 2025/4/14) - End Time: Specify the end time for data collection (e.g., 23:59:59)

3. Displayed Data

In DataViewer, you can view the following information:

Column Name Description Example
Area Location where the sensor is installed Office A
Layer Data hierarchy level Layer 1, Layer 2, Layer 3
Type Measurement type of the sensor Aqara-Temperature, Aqara-Humidity, Aqara-Pressure
Logical Device Logical name of the sensor L-lumi.weather-sens
Source ID Physical ID of the sensor F5-CF-2F-02-00-8D-15-00
Data ID Unique identifier for each measurement 1483300d04, 529fdc34773, e738def7061
Date/Time Date and time when data was recorded 2025/04/14 18:38:58.33
Value Measurement value 24.2℃, 62.58%, 994.8hPa

4. Usage Examples

For example, you can check data such as: - Office A temperature: 24.2℃ - Office A humidity: 62.58% - Office A pressure: 994.8hPa

5. Data Utilization Methods

The collected data can be utilized in the following ways: - Checking indoor environment comfort - Efficient operation of air conditioning equipment - Analysis of long-term environmental changes - Early detection of equipment malfunctions through anomaly detection

DataViewer is updated regularly, allowing you to always check the latest environmental data.